Brake Repair: South Salt Lake

Image of a Wheel

Utah Automotive Brake Repair

If your brakes have a low or spongy pedal or are squeaking, pulsating, or grinding, it’s time to let Master Muffler and Brake perform a complete brake system inspection. We can diagnose problems and concerns, repair or replace any worn components, and return your vehicle’s brake system back to tip-top shape.

If there is any question about whether it is time to replace your brake pads or rotors, come into any one of the 16 Master Muffler locations for a free brake assessment. Whether your vehicle has drums or disc brakes, Master Muffler can repair any problem or, if required, replace any setup. Utah brake repair is one of our specialties. We know how important it is in our climate that your brakes work well in icy and hot desert conditions. Let our automotive brake repair specialists take care of you.

Look to us for your Brake Needs

Whether your brakes are worn and squealing or just need a tune-up, let us fix your brakes. We’ll have you safely on the road in no time.

Get an Estimate
Find a Location
Request an Appointment

How Brakes Function

Vehicles have hydraulic brakes that use brake fluid to transfer force from your foot pressing on the brake pedal to the brake pads pressing against the tires of your car. When you push on the brake pedal, the pedal pushes against the brake fluid which expands through the brake system, causing a piston to push the brake pad against the brake disc on the tire. This friction causes the wheels to stop turning and the car to stop.

This method is effective, but also causes wear and tear on your brake system due to significant friction. For this reason, it is important to have your brakes inspected regularly so you can find and fix any problems. If there is a leak in the brake fluid line, there will not be enough pressure to cause the brakes to stop. If the brake pads are worn down too much, they will not be able to press on the brake discs hard enough to stop the wheels.

Your brake system is largely controlled by three different forces: leverage, hydraulic force, and friction. Leverage is gained through position and is an extremely important part of the brake system due to the size of your vehicle. It is not possible for the force applied by your leg alone to stop something the size and weight of a car or truck.  Instead, when your foot presses down on the brake pedal, leverage is created.

Your brake pedal is connected to a power booster through a system of levers and rods. The power booster has either a hydraulic pump or an engine vacuum. This part of the booster is what takes the original force supplied by your foot, multiplies it, and then transfers the increased force to the master cylinder.

The master cylinder is the most important part of your brake system’s hydraulics.  Once again using the principle of leverage, the cylinder forces your brake fluid through the rest of your system, creating a pressure that results in the final step of the braking process, friction.

Once the brake fluid has been pushed through your brake system, the pressure is transferred to your brake pads.  The brake pads are fitted against the wheels of your vehicle and the friction between your pads and your wheels is the final step in stopping your wheels.  Due to the above process, and the multiplying of the original force, the harder you initially push on your brakes, the greater the force that will be applied to your wheels.

Due to the intricate nature of your brake system, it is important to make sure that each part is regularly inspected.  This ensures that all is working efficiently, resulting in the assurance that your overall system is always functioning at its top capacity.

Methods to Check Your Brakes

Automobile brakes


You should make sure that your brakes and brake pads are routinely inspected. You can inspect them yourself or ask an auto repair professional to look at them. You can check your brake pads by looking through the space between the spokes of your wheels. There your brake pad rests, pressed against a metal rotor. You want to make sure that your brake pad is at least ¼ inch thick. If your brake pads are less than ¼ inch thick, it is time for a brake pad replacement.


Listen to the sounds your brakes are making as well as the way that your car is responding. Some sounds that are indicative of failing brakes include high-pitched screeching, grinding, or growling. The screeching comes from the indicator, which is a small metal shim designed to be an audible warning that you need brake replacement. Grinding and growling mean that your brakes have been completely worn down to the point that your discs and calipers are rubbing together. This can seriously damage your car, so if you hear these sounds, it is important you have your car inspected by an auto repair professional as soon as possible.


Pay attention to how your car reacts when you push on the brake. If the brake pedal is sinking to the floor, it is highly possible that you have an air or fluid leak. If your car is pulling to one side, your brake linings may be wearing at an uneven rate, or there is a foreign substance in your brake fluid. If your brake pedal vibrates when you push it down, you may have warped rotors. These vibrations will be similar to what you feel when your anti-lock brakes are engaged.

Come to Master Muffler

Because brakes are essential for your safety and the health of your car, it is important to keep them well-maintained. That’s where Master Muffler can help. Whether your brakes are worn and squealing or you just need them tuned up, bring your car in and let Master Muffler get your brakes working properly.  We are experts in brake replacement and repair.
Not the closest location? Find one near you